DG-25LD DIGITAL KEYPAD SSS SURFACE

Statement
The DG-25LD is a dual relay, digital code-operated keypad for access control which memorizes up to 49+50 individual user PINs Only those personnel who hold a PIN are authorized to access to a controlled area. The door reed switch input is used to cut off the time of relocking when the door is closed for the purpose of of Anti-Tailgating. It's designed to mount on any standard-single-gang electric wall box or on the surface of an interior or exterior wall. Logical memory can prevent unauthorized persons from gaining PIN code by trial and error. The system will shut down for 60 seconds after 32-digit of incorrect Master Code or PIN are entered (No beep goes off from the keypad ）.


Features
- Allow up to 49+50 PIN
- Dual relay output for multi-control
- Door Reed Switch Input for Anti-Tailgating
- Fully Programmable via keypad and master code
- 3 LED display with audible indication
- Non-Volatile Memory & Invalid PIN Lock-out
- Durable Stainless Steel housing with vandal resistant screws
- Optional Waterproof Keypad

Specification
- Operating Voltage: 12~24 VDC
- Current Draw: Holding: 40mA/12VDC;60mA/24VDC
- Pull in: 70mA/12VDC; 90mA/24VDC
- Input: request-to-exit, door reed switch
- Output: Dual relays, N.O./N.C./Com. Output (free voltage contact)
- Relay Rating: 3A/120VAC , 3A/24VDC
- Relay Activation Time:(*100,*200)
　Strike Time: 1~99 seconds
　Strike mode: Access Timer or Latch
- Memory Volume: 49+50 PIN codes
　Relay 1 is controlled by user 001~049
　Relay 2 is controlled by user 050~099
- PIN codes: 5-digit codes only
- Operating Temperature: -20~+70ºC
- Ambient Humidity: 5~95% relative humidity (non-condensing)
- Factory Master Code: 12345
- In toggle mode , the relay will switch between N.C. contact and N.O. contact upon entering PIN once.
- Net Weight:440g
- Material: Stainless steel